Ship propulsion hydrodynamics in waves : PhD thesis (engelsk)

No. S 235 - Energy efficiency in the industry : a study of the methods, potentials and interactions with the energy system

Fabian Bühler

No. S 251 - Design and optimization of turbomachinery for thermodynamic cycles utilizing low-temperature heat sources : Ph.D. thesis

Andrea Meroni

No. S 252 - In search of gold - measuring performance and evaluating potential business benefits of ecodesign : PhD thesis

Vinicius Picanço Rodrigues

No. S 253 - Disbond damage in aircraft sandwich structures : PhD thesis

Arash Farshidi

No. S 254 - Multi-scale design methods for topology optimization

Jeroen Peter Groen

No. S 255 - Mode of action-based variation risk identification : PhD thesis

Kristian Bjarklev

No. S 258 - Development of a model for propeller tip vortex cavitation and analysis of the radiated pressure fluctuations

Yasaman Mirsadraee

No. S 259 - Numerical simulation of the hydrodynamic behavior of the lubricant oil film in large two-stroke marine diesel engines

Nikolas Karvounis

No. S 260 - Composite materials for electrical transmission mast structures

Mehrtash Manouchehr

No. S 261 - High-performance heat pump systems : enhancing performance and range of heat pump systems for industry and district heating : PhD thesis

Benjamin Zühlsdorf

No. S 262 - State-of-the-art laser doppler systems development for turbulence measurements

Mohd Rusdy Bin Yaacob

No. S 263 - Damping of torsional beam vibrations

David Hoffmeyer

No. S 264 - Aerodynamic stability of long span bridges

Randi Nøhr Møller

No. S 265 - Constitutive behavior of tensile armor wires in unbonded flexible pipes : PhD thesis

Troels Vestergaard Lukassen

No. S 266 - Numerical and experimental study of flow in choanoflagellates and choanocytes

Seyed Saeed Asadzadeh

No. S 267 - Flow phenomena in selective catalytic reduction systems used in large two-stroke marine diesel engines

Erik Gotfredsen

No. S 268 - Design and performance analysis of plate heat exchangers for heat pumps using pure and mixed refrigerants : Ph.D. thesis

Roberta Mancini

No. S 269 - Resonant piezoelectric shunt damping of structures

Johan Frederik Toftekær

No. S 270 - Advancing numerical simulation tools for ductile fracture in thin metal plates

Rasmus Grau Andersen

No. S 271 - Evaluation of the prospects for waste heat recovery on board liquefied natural gas-fuelled ships : PhD thesis

Enrico Baldasso

No. S 272 - Optimization of multiphysics problems : transient vibroacoustic and thermal-fluid systems

Cetin Batur Dilgen

No. S 273 - Modelling of gas foil bearings towards controllable operation : multi-domain analysis : PhD thesis

Sebastian von Osmanski

No. S 274 - Through-thickness damage timeline of fiber composites under dynamic loading : Ph.D. thesis

Ignacio Vidal Pérez Martínez

No. S 275 - Operation and maintenance of product configuration systems in project-based small and medium-sized enterprises

Jeppe Bredahl Rasmussen

No. S 277 - Circular economy business modelling : decoupling value creation from resource consumption within manufacturing companies : PhD thesis

Marina de Pádua Pieroni

No. S 278 - Vibration-based estimation of bolt tension

Marie Brøns

No. S 279 - Optimal integration of district heating, district cooling, heat sources and heat sinks

Henrik Pieper

No. S 280 - Heat pumps supplying district heating and ancillary services for the power system : PhD thesis

Wiebke Meesenburg

No. S 281 - Methanol production integrating biomass thermochemical conversion and solid oxide cells : PhD thesis

Giacomo Butera

No. S 282 - Aerodynamic and aeroelastic shape optimization of aircraft wings

Cian Conlan-Smith

No. S 283 - Sustainability screening as a decision support for early stage circular economy development : moving the sails of circular economy in the direction of sustainability : Ph.D. thesis

Mariia Kravchenko

No. S 285 - Topology optimization of transient problems with frictional contact and finite strain

Hansotto Kristiansen

No. S 286 - Development of expeditious process integration methods for retrofit of non-energy-intensive industries : PhD thesis

Riccardo Bergamini

No. S 288 - Variation management in project-based design : a contribution to a product portfolio manager's toolbox : a thesis presented for the degree of Doctor of Philosophy (Ph.D.)

Christian Alexander Bertram

No. S 289 - Modelling of ductile failure over multiple scales : Ph.D. thesis

Ingrid Holte

No. S 290 - A numerical investigation of irregular water waves and their statistical properties

Mathias Klahn

No. S 291 - Optimizing oil production by novel technology integration : well flow modeling : a dissertation submitted to the Technical University of Denmark (DTU) as partial fulfillment of the requirements for the degree of Ph.D. (Philosophiae Doctor)

Casper Schytte Hemmingsen

No. S 292 - Ship propulsion hydrodynamics in waves : PhD thesis

Simone Saettone

No. S 293 - Exploring multi-functionality in biologically-inspired design through systematic development of medical equipment supporting corneal transplantation research : PhD thesis

Nicklas Werge Svendsen

No. S 294 - Tunnelling cracks in composite laminates under planar biaxial strain controlled fatigue loading : Ph.D. thesis

Aakash Moncy

No. S 295 - Analysis and optimization of nonlinear structures and materials including internal contact

Gore Lukas Bluhm

No. S 296 - Stiffness and strength of architected materials

Morten Nørgaard Andersen (f. 1990-04-13)

No. S 298 - Micromechanical modeling of rolling contact fatigue

Hamidreza Mahdavi

No. S 299 - Two-phase cooling of power electronics : an investigation on flow boiling of refrigerants in narrow channels : PhD thesis submitted ... for the degree of Doctor of Philosophy

Gennaro Criscuolo

No. S 301 - Micromechanics of 3d printed metals

Kinga Somlo

No. S 304 - Numerical study of ship performance in calm water and in waves

Henrik Mikkelsen

No. S 306 - Mode-III fracture characterization of composites : a thesis presented for the degree of Doctor of Philosophy

Pietro Sabbadin

No. S 307 - Design for manufacturing and characterization of small-scale turbomachinery impellers : PhD thesis

Matthias Geiselhart

No. S 308 - Design by prototyping : strategic support for prototypedriven product development : PhD thesis

Camilla Arndt Hansen

No. S 310 - Design, modelling and simulation of compact ammonia chiller and heat pump units : PhD thesis

Valentin Salgado Fuentes